Seite 1 von 8
WIederkehrender Fehler beim booten
Verfasst: Mittwoch 6. Januar 2021, 20:53
von DeeBee
Hallo,
Ich habe leider ein immer wiederkehrendes Problem: Wenn ich eine etwas längere Zeit nicht mehr Manjaro nutze, also z.B. in Windows bin und Manjaro dann wieder benutzen will, kommt immer das gleiche Problem:
ERROR: Root device mounted successfully, but /sbin/init does not exist.
Bailing out, you are on your own now. Good luck.
sh: can't access tty: job control turned off
Jedes mal wenn ich es dann neu installiere, funktioniert es dann einige Zeit lang, bis dann wieder genau das gleiche passiert.
Ich habe natürlich schon die ganzen anderen Antworten auf dieses Problem ausprobiert, aber leider hat es nicht funktioniert, oder ich habe es nicht verstanden, da ich mich nicht besonders gut damit auskenne (ich benutze Linux erst seit kurzem und hab mich vorher nicht sonderlich damit auseinandergesetzt). So ich hoffe dass mir jemand helfen kann und falls das noch wichtig zu sagen ist: Ich habe Manjaro auf einer extra ssd installiert, auf der sonst nichts drauf ist.
Re: WIederkehrender Fehler beim booten
Verfasst: Mittwoch 6. Januar 2021, 23:13
von gosia
Hallo DeeBee,
ich habe keinerlei Vorstellung, wie das passieren kann, aber probiere mal diese Lösung
https://forum.manjaro.org/t/sbin-init-d ... found/2965
es könnte aber auch sein, daß Du btrfs als Filesystem benutzt (was als Anfänger eine nicht empfehlenswerte Wahl gewesen wäre). In dem Fall siehe dies
https://wiki.archlinux.org/index.php/RE ... oot_stanza
DeeBee hat geschrieben: ↑Mittwoch 6. Januar 2021, 20:53
Ich habe natürlich schon die ganzen anderen Antworten auf dieses Problem ausprobiert, aber leider hat es nicht funktioniert
Naja schwierig, weil man da nur raten kann, was die "ganzen anderen Antworten" sind.
viele Grüße gosia
Re: WIederkehrender Fehler beim booten
Verfasst: Mittwoch 6. Januar 2021, 23:38
von DeeBee
Hallo gosia,
Erstmal vielen Dank für die Antwort. Naja mit anderen Antworten meine ich alle, die ich beim suchen im Internet gefunden und verstanden habe. Die Antworten im ersten Link habe ich leider nicht alle verstanden, nur die letzte was ich auch schon ausprobiert hatte. Hat nur leider auch nicht funktioniert oder ich habe einfach was falsch gemacht und deswegen hat es nicht funktioniert, jedenfalls bekomme ich die gleiche Fehlermeldung. Achso und wegen dem btrfs Filesystem: Wie findet man denn heraus, welches man nutzt? Bei der Installation habe ich das nämlich nicht angegeben, da ich die Partitionierung automatisch machen hab lassen.
Viele Grüße DeeBee
Re: WIederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 10:25
von cip2017
Bei automatischer Installation wird im Regelfall das ext4 Filesystem Benutzt.
Also sollte Es daran nicht liegen.
Ansonsten Schliesse ich Mich der Meinung von gosia an.
Hätte da Leider im Moment keinen Ansatzpunkt um Dir da etwas mehr Hilfestellung geben zu können.
Re: WIederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 12:52
von gosia
Hallo DeeBee,
vielleicht helfen uns ein paar Infos weiter. Poste bitte die Ausgabe von
Code: Alles auswählen
ls -l /sbin/init
ls -l /lib/systemd/systemd
inxi -Fxxxrza
viele Grüße gosia
Re: Wiederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 20:12
von DeeBee
Hallo gosia,
Ich gehe jetzt einfach mal davon aus, dass ich die Befehle in die GRUB Commandline vor dem starten von Manjaro eingeben soll. Tut mir leid wenn das jetzt absolut keinen Sinn ergibt, aber wir gesagt ich kenne mich nicht besonders aus.
Bei dem ersten Befehl kam heraus:
Bei dem zweitem einfach nur eine leere Zeile
und bei dem dritten:
Ich hoffe das hilft und dass ich es an der richtigen Stelle eingegeben habe
Viele Grüße DeeBee
Re: WIederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 20:42
von gosia
Hallo DeeBee,
DeeBee hat geschrieben: ↑Donnerstag 7. Januar 2021, 20:12
Ich gehe jetzt einfach mal davon aus, dass ich die Befehle in die GRUB Commandline vor dem starten von Manjaro eingeben soll
Naja, hätte ich genauer schreiben müssen. Nein, nicht bei Grub eingeben, sondern in ein Terminal, wenn dein Manjaro läuft, das heisst, wenn Du dich eingeloggt hast.
viele Grüße gosia
Re: WIederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 20:51
von DeeBee
Hallo Gosia,
Ah Okay. Aber wie soll ich das denn eingeben, wenn ich garnicht in Manjaro rein komme? Deswegen hatte ich vermutet dass ich die GRUB Commandline benutzen soll.
Viele Grüße DeeBee
Re: WIederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 21:40
von gosia
Hallo Deebee,
wegen dem hier
DeeBee hat geschrieben: ↑Mittwoch 6. Januar 2021, 20:53
Jedes mal wenn ich es dann neu installiere, funktioniert es dann einige Zeit lang
bin ich fälschlicherweise davon ausgegangen, daß Du neu installiert hast und nur vorbeugen wolltest.
Dann eben anders:
Nimm ein Live-Medium, von dem Du bootest und dich einloggst. Dort gibst Du im Terminal
ein und anschliessend die Kommandos.
viele Grüße gosia
Re: WIederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 21:50
von DeeBee
Hallo gosia,
Okay ich habe es gemacht, nur leider kommt direkt eine Fehlermeldung:
Re: WIederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 21:54
von DeeBee
Ahh scheint wohl doch kein Fehler zu sein, die Befehle funktionieren nämlich trozdem:
Code: Alles auswählen
[manjaro@manjaro ~]$ manjaro-chroot -a
grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
==> Detected systems:
--> 0) ManjaroLinux
==> Select system to mount [0-0] :
ls -l /sbin/init
/usr/lib/manjaro-tools/util-mount.sh: line 65: ls -l /sbin/init: division by 0 (error token is "sbin/init")
chroot: failed to run command '/bin/bash': No such file or directory
[manjaro@manjaro ~]$ ls -l /lib/systemd/systemd
-rwxr-xr-x 1 root root 1714224 Dec 16 17:55 /lib/systemd/systemd
[manjaro@manjaro ~]$ inxi -Fxxxrza
System:
Kernel: 5.9.16-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=manjaro misolabel=MANJARO_KDE_2021 quiet systemd.show_status=1
apparmor=1 security=apparmor driver=free nouveau.modeset=1 i915.modeset=1
radeon.modeset=1
Desktop: KDE Plasma 5.20.4 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM
Distro: Manjaro Linux
Machine:
Type: Desktop Mobo: Micro-Star model: B450M PRO-VDH V2 (MS-7A38) v: 6.0
serial: <filter> UEFI: American Megatrends v: 8.C0 date: 06/11/2020
CPU:
Info: 6-Core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+
family: 17 (23) model-id: 8 stepping: 2 microcode: 800820D L2 cache: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 91247
Speed: 3269 MHz min/max: N/A Core speeds (MHz): 1: 3269 2: 3091 3: 3345
4: 3054 5: 3631 6: 3033 7: 3799 8: 3780 9: 3793 10: 3360 11: 3793 12: 3339
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: Sapphire Limited Nitro+ driver: amdgpu v: kernel bus ID: 29:00.0
chip ID: 1002:67df
Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver: amdgpu,ati
unloaded: modesetting alternate: fbdev,vesa display ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: HDMI-A-0 res: 1920x1080 hz: 75 dpi: 82
size: 598x336mm (23.5x13.2") diag: 686mm (27")
OpenGL: renderer: Radeon RX 580 Series (POLARIS10 DRM 3.39.0 5.9.16-1-MANJARO
LLVM 11.0.0)
v: 4.6 Mesa 20.3.1 direct render: Yes
Audio:
Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
vendor: Sapphire Limited driver: snd_hda_intel v: kernel bus ID: 29:00.1
chip ID: 1002:aaf0
Device-2: AMD Family 17h HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus ID: 2b:00.3 chip ID: 1022:1457
Sound Server: ALSA v: k5.9.16-1-MANJARO
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Micro-Star MSI driver: r8169 v: kernel port: f000 bus ID: 25:00.0
chip ID: 10ec:8168
IF: enp37s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.08 TiB used: 210.7 MiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Crucial model: CT1000P1SSD8
size: 931.51 GiB block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 serial: <filter> rev: P3CR020 temp: 32.9 C
ID-2: /dev/sda maj-min: 8:0 vendor: Crucial model: CT120BX500SSD1
size: 111.79 GiB block size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
serial: <filter> rev: R013
ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: Flash Drive FIT
size: 59.75 GiB block size: physical: 512 B logical: 512 B serial: <filter>
rev: 1100
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw size: N/A size: 11.74 GiB used: 210.7 MiB (1.8%) fs: overlay
source: ERR-102
Swap:
Alert: No Swap data was found.
Sensors:
System Temperatures: cpu: 30.0 C mobo: N/A gpu: amdgpu temp: 27.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 811
Repos:
Packages: pacman: 1264 lib: 375 flatpak: 0
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://mirror.tuchola-dc.pl/manjaro/stable/$repo/$arch
2: https://mirrors.zju.edu.cn/manjaro/stable/$repo/$arch
3: https://osmirror.org/manjaro/stable/$repo/$arch
4: https://mirrors.dotsrc.org/manjaro/stable/$repo/$arch
5: http://mirror.dacentec.com/manjaro/stable/$repo/$arch
6: http://ftp.tu-chemnitz.de/pub/linux/manjaro/stable/$repo/$arch
7: http://repo.manjaro.org.uk/stable/$repo/$arch
8: http://ftp.cuhk.edu.hk/pub/Linux/manjaro/stable/$repo/$arch
9: http://manjaro.melbourneitmirror.net/stable/$repo/$arch
10: https://repo.sadjad.ac.ir/manjaro/stable/$repo/$arch
11: http://manjaro.telecoms.bg/stable/$repo/$arch
12: http://distro.ibiblio.org/manjaro/stable/$repo/$arch
13: https://www.mirrorservice.org/sites/repo.manjaro.org/repos/stable/$repo/$arch
14: http://mirror.rise.ph/manjaro/stable/$repo/$arch
15: http://ftp.linux.org.tr/manjaro/stable/$repo/$arch
16: http://pet.inf.ufsc.br/mirrors/manjarolinux/stable/$repo/$arch
17: https://ftp.cc.uoc.gr/mirrors/linux/manjaro/stable/$repo/$arch
18: https://mirror.netcologne.de/manjaro/stable/$repo/$arch
19: https://repo.rhindon.net/manjaro/stable/$repo/$arch
20: https://mirror.philpot.de/manjaro/stable/$repo/$arch
21: https://mirror.netzspielplatz.de/manjaro/packages/stable/$repo/$arch
22: http://manjaro.dcc.uchile.cl/stable/$repo/$arch
23: http://ftp.tsukuba.wide.ad.jp/Linux/manjaro/stable/$repo/$arch
24: http://kambing.ui.ac.id/manjaro/stable/$repo/$arch
25: http://ftp.belnet.be/mirrors/manjaro/stable/$repo/$arch
26: http://mirror.infotronik.hu/mirrors/pub/manjaro/stable/$repo/$arch
27: http://manjaro.barata.pt/stable/$repo/$arch
28: http://mirror.xeonbd.com/manjaro/stable/$repo/$arch
29: http://mirrors.tuna.tsinghua.edu.cn/manjaro/stable/$repo/$arch
30: http://kibo.remi.lu/stable/$repo/$arch
31: https://ftp.lysator.liu.se/pub/manjaro/stable/$repo/$arch
32: http://mirror.ventraip.net.au/Manjaro/stable/$repo/$arch
33: http://mirrors.serverhost.ro/manjaro/packages/stable/$repo/$arch
34: http://ftp.caliu.cat/manjaro/stable/$repo/$arch
35: https://mirrors.ucr.ac.cr/manjaro/stable/$repo/$arch
36: https://mirror.yandex.ru/mirrors/manjaro/stable/$repo/$arch
37: http://mirror.chmuri.net/manjaro/stable/$repo/$arch
38: http://mirror.inode.at/manjaro/stable/$repo/$arch
39: http://mirror.datacenter.by/pub/mirrors/manjaro/stable/$repo/$arch
40: http://mirror.ragenetwork.de/manjaro/stable/$repo/$arch
41: https://mirrors.shuosc.org/manjaro/stable/$repo/$arch
42: https://ftp.nluug.nl/pub/os/Linux/distr/manjaro/stable/$repo/$arch
43: https://ct.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
44: https://mirror.espoch.edu.ec/manjaro/stable/$repo/$arch
45: http://kartolo.sby.datautama.net.id/manjaro/stable/$repo/$arch
46: https://ba.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
47: https://mirrors.netix.net/manjaro/stable/$repo/$arch
48: https://manjaro.c3sl.ufpr.br/stable/$repo/$arch
49: http://ftp.riken.jp/Linux/manjaro/stable/$repo/$arch
50: https://mirror.zetup.net/manjaro/stable/$repo/$arch
51: http://linorg.usp.br/manjaro/stable/$repo/$arch
52: https://www.uex.dk/public/manjaro/stable/$repo/$arch
53: https://download.nus.edu.sg/mirror/manjaro/stable/$repo/$arch
54: https://manjaro.cu.be/stable/$repo/$arch
55: https://mirror.dkm.cz/manjaro/stable/$repo/$arch
56: https://manjaro.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
57: http://free.nchc.org.tw/manjaro/stable/$repo/$arch
58: http://mirror.ufam.edu.br/manjaro/stable/$repo/$arch
59: https://mirror.koddos.net/manjaro/stable/$repo/$arch
60: https://mirrors.shu.edu.cn/manjaro/stable/$repo/$arch
61: http://mirror.is.co.za/mirrors/manjaro.org/stable/$repo/$arch
62: https://mirrors.ocf.berkeley.edu/manjaro/stable/$repo/$arch
63: https://mirrors.sjtug.sjtu.edu.cn/manjarostable/$repo/$arch
64: http://mirror.truenetwork.ru/manjaro/stable/$repo/$arch
65: https://mirrors.ustc.edu.cn/manjaro/stable/$repo/$arch
66: https://mirror.cedia.org.ec/manjaro/stable/$repo/$arch
67: https://manjaro.moson.eu/stable/$repo/$arch
68: http://mirror.upb.edu.co/manjarostable/$repo/$arch
69: https://mirror.math.princeton.edu/pub/manjaro/stable/$repo/$arch
70: http://mirror.catn.com/pub/manjaro/stable/$repo/$arch
71: https://ftp.halifax.rwth-aachen.de/manjaro/stable/$repo/$arch
72: https://manjaro.ipacct.com/manjaro/stable/$repo/$arch
73: https://mirror.clarkson.edu/manjaro/stable/$repo/$arch
74: http://manjaro.mirrors.uk2.net/stable/$repo/$arch
75: http://ftp.free.org/mirrors/repo.manjaro.org/repos/stable/$repo/$arch
76: http://ftp.snt.utwente.nl/pub/linux/manjaro/stable/$repo/$arch
77: http://manjaro.mirror.ac.za/stable/$repo/$arch
78: http://ftp.rz.tu-bs.de/pub/mirror/manjaro.org/repos/stable/$repo/$arch
Info:
Processes: 310 Uptime: 9m wakeups: 0 Memory: 15.65 GiB used: 2.08 GiB (13.3%)
Init: systemd v: 247 Compilers: gcc: N/A Shell: Bash v: 5.1.0
running in: konsole inxi: 3.2.01
[manjaro@manjaro ~]$
Re: WIederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 23:20
von gosia
Hallo DeeBee,
DeeBee hat geschrieben: ↑Donnerstag 7. Januar 2021, 21:54
die Befehle funktionieren nämlich trozdem
leider nicht ganz. Hast Du nach dieser Abfrage
DeeBee hat geschrieben: ↑Donnerstag 7. Januar 2021, 21:54
==> Select system to mount [0-0] :
eine Null eingegeben? Das sollte zur Sicherheit unbedingt passieren. Probiere das bitte nochmal mit der Eingabe von 0 und erst danach die Kommandos eingeben. Wenn die Ausgabe dann immer noch so aussieht wie vorher, dann sag Bescheid und wir müssen uns was anderes ausdenken.
Sollte die Ausgabe sich aber unterscheiden (auch wenn nur minimal) bitte nochmal posten.
viele Grüße gosia
Re: WIederkehrender Fehler beim booten
Verfasst: Donnerstag 7. Januar 2021, 23:41
von DeeBee
Hallo Gosia,
Okay, hier sind die neuen Ergebnisse:
Code: Alles auswählen
[manjaro@manjaro ~]$ manjaro-chroot -a
grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
==> Detected systems:
--> 0) ManjaroLinux
==> Select system to mount [0-0] :
0
==> ERROR: You can't mount 0!
[manjaro@manjaro ~]$ ls -l /sbin/init
lrwxrwxrwx 1 root root 22 Dec 16 17:55 /sbin/init -> ../lib/systemd/systemd
[manjaro@manjaro ~]$ ls -l /lib/systemd/systemd
-rwxr-xr-x 1 root root 1714224 Dec 16 17:55 /lib/systemd/systemd
[manjaro@manjaro ~]$ inxi -Fxxxrza
System: Kernel: 5.9.16-1-MANJARO x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC misobasedir=manjaro
misolabel=MANJARO_KDE_2021 quiet systemd.show_status=1 apparmor=1 security=apparmor driver=free
nouveau.modeset=1 i915.modeset=1 radeon.modeset=1
Desktop: KDE Plasma 5.20.4 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM Distro: Manjaro Linux
Machine: Type: Desktop Mobo: Micro-Star model: B450M PRO-VDH V2 (MS-7A38) v: 6.0 serial: <filter>
UEFI: American Megatrends v: 8.C0 date: 06/11/2020
CPU: Info: 6-Core model: AMD Ryzen 5 2600 bits: 64 type: MT MCP arch: Zen+ family: 17 (23) model-id: 8
stepping: 2 microcode: 800820D L2 cache: 3 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 91246
Speed: 3037 MHz min/max: N/A Core speeds (MHz): 1: 3037 2: 3357 3: 3038 4: 3568 5: 3054 6: 3424
7: 3186 8: 3796 9: 3439 10: 3440 11: 3066 12: 3637
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Advanced Micro Devices [AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
vendor: Sapphire Limited Nitro+ driver: amdgpu v: kernel bus ID: 29:00.0 chip ID: 1002:67df
Display: x11 server: X.Org 1.20.10 compositor: kwin_x11 driver: amdgpu,ati unloaded: modesetting
alternate: fbdev,vesa display ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2") s-diag: 582mm (22.9")
Monitor-1: HDMI-A-0 res: 1920x1080 hz: 75 dpi: 82 size: 598x336mm (23.5x13.2") diag: 686mm (27")
OpenGL: renderer: Radeon RX 580 Series (POLARIS10 DRM 3.39.0 5.9.16-1-MANJARO LLVM 11.0.0)
v: 4.6 Mesa 20.3.1 direct render: Yes
Audio: Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] vendor: Sapphire Limited
driver: snd_hda_intel v: kernel bus ID: 29:00.1 chip ID: 1002:aaf0
Device-2: Advanced Micro Devices [AMD] Family 17h HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel bus ID: 2b:00.3 chip ID: 1022:1457
Sound Server: ALSA v: k5.9.16-1-MANJARO
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI driver: r8169
v: kernel port: f000 bus ID: 25:00.0 chip ID: 10ec:8168
IF: enp37s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 1.08 TiB used: 144.3 MiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Crucial model: CT1000P1SSD8 size: 931.51 GiB block size:
physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: P3CR020 temp: 33.9 C
ID-2: /dev/sda maj-min: 8:0 vendor: Crucial model: CT120BX500SSD1 size: 111.79 GiB block size:
physical: 512 B logical: 512 B speed: 6.0 Gb/s serial: <filter> rev: R013
ID-3: /dev/sdb maj-min: 8:16 type: USB vendor: Samsung model: Flash Drive FIT size: 59.75 GiB
block size: physical: 512 B logical: 512 B serial: <filter> rev: 1100
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw size: N/A size: 11.74 GiB used: 144.3 MiB (1.2%) fs: overlay source: ERR-102
Swap: Alert: No Swap data was found.
Sensors: System Temperatures: cpu: 29.5 C mobo: N/A gpu: amdgpu temp: 27.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 812
Repos: Packages: pacman: 1264 lib: 375 flatpak: 0
Active pacman repo servers in: /etc/pacman.d/mirrorlist
1: https://repo.sadjad.ac.ir/manjaro/stable/$repo/$arch
2: https://manjaro.cu.be/stable/$repo/$arch
3: https://mirror.koddos.net/manjaro/stable/$repo/$arch
4: http://free.nchc.org.tw/manjaro/stable/$repo/$arch
5: https://mirror.clarkson.edu/manjaro/stable/$repo/$arch
6: https://ftp.nluug.nl/pub/os/Linux/distr/manjaro/stable/$repo/$arch
7: http://mirror.upb.edu.co/manjarostable/$repo/$arch
8: https://mirrors.sjtug.sjtu.edu.cn/manjarostable/$repo/$arch
9: https://repo.rhindon.net/manjaro/stable/$repo/$arch
10: http://ftp.tu-chemnitz.de/pub/linux/manjaro/stable/$repo/$arch
11: http://mirrors.serverhost.ro/manjaro/packages/stable/$repo/$arch
12: http://manjaro.melbourneitmirror.net/stable/$repo/$arch
13: http://kartolo.sby.datautama.net.id/manjaro/stable/$repo/$arch
14: http://ftp.rz.tu-bs.de/pub/mirror/manjaro.org/repos/stable/$repo/$arch
15: https://mirror.zetup.net/manjaro/stable/$repo/$arch
16: https://mirrors.netix.net/manjaro/stable/$repo/$arch
17: https://mirrors.zju.edu.cn/manjaro/stable/$repo/$arch
18: http://manjaro.dcc.uchile.cl/stable/$repo/$arch
19: https://ftp.lysator.liu.se/pub/manjaro/stable/$repo/$arch
20: https://ba.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
21: http://mirror.dacentec.com/manjaro/stable/$repo/$arch
22: https://www.mirrorservice.org/sites/repo.manjaro.org/repos/stable/$repo/$arch
23: http://mirror.inode.at/manjaro/stable/$repo/$arch
24: https://mirror.dkm.cz/manjaro/stable/$repo/$arch
25: https://mirror.netzspielplatz.de/manjaro/packages/stable/$repo/$arch
26: http://manjaro.barata.pt/stable/$repo/$arch
27: https://mirror.math.princeton.edu/pub/manjaro/stable/$repo/$arch
28: http://manjaro.mirrors.uk2.net/stable/$repo/$arch
29: http://ftp.caliu.cat/manjaro/stable/$repo/$arch
30: http://ftp.tsukuba.wide.ad.jp/Linux/manjaro/stable/$repo/$arch
31: http://mirror.ufam.edu.br/manjaro/stable/$repo/$arch
32: https://mirrors.shuosc.org/manjaro/stable/$repo/$arch
33: https://manjaro.c3sl.ufpr.br/stable/$repo/$arch
34: http://mirror.catn.com/pub/manjaro/stable/$repo/$arch
35: https://manjaro.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
36: http://mirror.is.co.za/mirrors/manjaro.org/stable/$repo/$arch
37: https://mirrors.ocf.berkeley.edu/manjaro/stable/$repo/$arch
38: http://kibo.remi.lu/stable/$repo/$arch
39: http://linorg.usp.br/manjaro/stable/$repo/$arch
40: http://mirror.datacenter.by/pub/mirrors/manjaro/stable/$repo/$arch
41: http://ftp.riken.jp/Linux/manjaro/stable/$repo/$arch
42: https://download.nus.edu.sg/mirror/manjaro/stable/$repo/$arch
43: https://mirror.netcologne.de/manjaro/stable/$repo/$arch
44: http://ftp.linux.org.tr/manjaro/stable/$repo/$arch
45: http://mirror.rise.ph/manjaro/stable/$repo/$arch
46: https://mirror.tuchola-dc.pl/manjaro/stable/$repo/$arch
47: http://ftp.free.org/mirrors/repo.manjaro.org/repos/stable/$repo/$arch
48: http://manjaro.mirror.ac.za/stable/$repo/$arch
49: https://ct.mirror.garr.it/mirrors/manjaro/stable/$repo/$arch
50: https://ftp.halifax.rwth-aachen.de/manjaro/stable/$repo/$arch
51: http://ftp.cuhk.edu.hk/pub/Linux/manjaro/stable/$repo/$arch
52: https://mirror.espoch.edu.ec/manjaro/stable/$repo/$arch
53: https://mirrors.dotsrc.org/manjaro/stable/$repo/$arch
54: http://mirror.ragenetwork.de/manjaro/stable/$repo/$arch
55: https://www.uex.dk/public/manjaro/stable/$repo/$arch
56: http://mirror.infotronik.hu/mirrors/pub/manjaro/stable/$repo/$arch
57: https://mirrors.ucr.ac.cr/manjaro/stable/$repo/$arch
58: http://distro.ibiblio.org/manjaro/stable/$repo/$arch
59: http://kambing.ui.ac.id/manjaro/stable/$repo/$arch
60: http://mirror.ventraip.net.au/Manjaro/stable/$repo/$arch
61: http://mirror.chmuri.net/manjaro/stable/$repo/$arch
62: https://ftp.cc.uoc.gr/mirrors/linux/manjaro/stable/$repo/$arch
63: http://ftp.belnet.be/mirrors/manjaro/stable/$repo/$arch
64: http://pet.inf.ufsc.br/mirrors/manjarolinux/stable/$repo/$arch
65: http://mirror.xeonbd.com/manjaro/stable/$repo/$arch
66: http://repo.manjaro.org.uk/stable/$repo/$arch
67: https://mirrors.shu.edu.cn/manjaro/stable/$repo/$arch
68: http://mirror.truenetwork.ru/manjaro/stable/$repo/$arch
69: http://ftp.snt.utwente.nl/pub/linux/manjaro/stable/$repo/$arch
70: https://mirror.cedia.org.ec/manjaro/stable/$repo/$arch
71: https://manjaro.moson.eu/stable/$repo/$arch
72: https://mirror.philpot.de/manjaro/stable/$repo/$arch
73: http://manjaro.telecoms.bg/stable/$repo/$arch
74: https://manjaro.ipacct.com/manjaro/stable/$repo/$arch
75: http://mirrors.tuna.tsinghua.edu.cn/manjaro/stable/$repo/$arch
76: https://osmirror.org/manjaro/stable/$repo/$arch
77: https://mirror.yandex.ru/mirrors/manjaro/stable/$repo/$arch
78: https://mirrors.ustc.edu.cn/manjaro/stable/$repo/$arch
Info: Processes: 336 Uptime: 2m wakeups: 0 Memory: 15.65 GiB used: 1.83 GiB (11.7%) Init: systemd v: 247
Compilers: gcc: N/A Shell: Bash v: 5.1.0 running in: konsole inxi: 3.2.01
[manjaro@manjaro ~]$
Mir ist allerdings noch aufgefallen, dass wenn ich noch eine 0 eingebe, die Resultate nicht mehr von dem normalen eingeben ohne manjaro-chroot -a abweichen (siehe Screenshot)
Viele Grüße DeeBee
Re: WIederkehrender Fehler beim booten
Verfasst: Freitag 8. Januar 2021, 15:26
von gosia
Hallo DeeBee,
das wird schwierig, weil es wohl irgendwie mit UEFI zusammenhängt und da habe ich keine Ahnung. Aber trotzdem, boote nochmal vom Live-Medium und poste die Ausgabe von
ein vorheriges manjaro-chroot ist da nicht notwendig.
Außerdem, ist in deinem BIOS UEFI an? Wenn ja, hast Du Manjaro dann auch im UEFI-Mode installiert?
https://wiki.manjaro.org/index.php?titl ... tall_Guide
viele Grüße gosia
Re: WIederkehrender Fehler beim booten
Verfasst: Freitag 8. Januar 2021, 16:49
von DeeBee
Hallo gosia,
UEFI? War das nich das mit grafischer Oberfläche und Maus-unterstützung? Kann man das überhaupt aus machen? Ich erinnere mich, dass man für Windows die Auswahl zwischen UEFI und CSM hatte, aber für manjaro konnte ich eine solche option nicht finden. Ich gehe jetzt einfach mal davon aus, dass es an ist, aber schaue gleich nochmal nach ob ich eine solche option finden kann. Also hier sind erstmal die Ausgeben:
Viele Grüße DeeBee